The GSM communicator module is designed for the JA-100K and JA-100KR alarm control panels. It serves as a backup and extension of the LAN communicator, which is part of the control panel.
-Xuất xứ tại Czech Rep, EU.
|Module power supply
||12V DC (from the control panel)
|Average current consumption
||approx. 40 mA (depends on GSM signal strength)
|Peak current consumption
|GSM communication band
||QUAD-BAND, 850 / 900 / 1800 / 1900MHz
||Security grade 2/Environmental class II (Note: this applies only in combination with a security-grade-2-certified control panel. For more info about ARC settings, see the Control panel installation manual)
|- Conforms to
||EN 50131-1 +A1 ¬+A2, EN 50131-3, EN 50131-10, EN 50136-1, EN 50136-2, ANSI SIA DC-09, T 031
|- Operational environment
|- Operational temperature
||-10 °C to 40 °C
|- Average operational humidity
|- SPT communicator type
||SPT type Z (control panel expansion module)
|- AS/SPT interface
|- Supported ATS class/communication protocol:
|ATS class 1)
|SP3 - SP5
ANSI SIA DC-09
ANSI SIA DC-09
1. The ATS classes listed in the ATS interface configuration with a transmission protocol are the maximum of what is possible to declare when creating an alarm communication path. The operational classification has to be determined by the establisher after the ARC’s agreement. The alarm communication path is created according to CLC/TS 50136-7 application guidelines.
2. DP4 is supported only in configuration with the LAN communicator.
LAN communication provided via WIFI or GSM is considered as radio communication therefore it is not possible to use a GSM communicator and a WIFI WAN network when a DPx path is created.
SPx: One communication path to an ARC (Single path) = 1 transmission medium
DPX: Dual communication path to an ARC (Dual path) = 2 different transmission media, for example Radio communication (GSM) and Metallic or Optical cables (PSTN, LAN).
|- Compatible with RCT (ARC receiver)
||according to communication protocols
|- Certification body
|Also complies with
||EN 60950-1, ETSI EN 301 489-1, ETSI EN 301 489-7, EN 55022, EN 50130-4, ETSI EN 301 419-1 and EN 301 511
|Called ID (CLIP)
||ETSI EN 300 089
|Can be operated according to
Nội dung tùy chỉnh viết ở đây